<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Solar Energy Research</JournalTitle>
				<Issn>2588-3097</Issn>
				<Volume>7</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>10</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Assessment of Thermal Behavior of a Flat Plate Water Heater Solar Collector at Different Day Times by Computational Fluid Dynamics Method</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1134</FirstPage>
			<LastPage>1142</LastPage>
			<ELocationID EIdType="pii">88970</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jser.2022.333698.1227</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Farzaneh</FirstName>
					<LastName>Sajadipour</LastName>
<Affiliation>Mechanical Engineering of Biosystems Department, Ilam University, Ilam, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>Kamran</FirstName>
					<LastName>Kheiralipour</LastName>
<Affiliation>Mechanical Engineering of Biosystems Department, Ilam University, Ilam, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>Esmaeil</FirstName>
					<LastName>Mirzaee- Ghaleh</LastName>
<Affiliation>Assistant Professor in Mechanical Engineering of Agricultural Machinery Department. Razi University, Kermanshah. Iran</Affiliation>

</Author>
<Author>
					<FirstName>Hekmat</FirstName>
					<LastName>Rabani</LastName>
<Affiliation>Mechanical Engineering of Biosystems, Razi University, Kermanshah, Iran.</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>11</Month>
					<Day>09</Day>
				</PubDate>
			</History>
		    <Abstract>Water heaters are important tools to use solar energy, as one of the main renewable energy sources, for increasing water temperature. The present research was conducted to predict the outlet fluid temperature of a solar water heater with a flat plate collector by the computational fluid dynamics method. Initially the ambient temperature, the temperature of the inlet and outlet fluid, and the temperature of the collector were experimentally measured from 10 am to 18 pm every two hours. The fluid flow tubes of the flat plate solar collector were simulated in the ANSYS Fluent Software. The temperature of the outlet fluid was calculated based on the measured variables by the computational fluid dynamics method. For that, k-ε turbulent model was used for simulating the collector in the software. A validation was carried out between experimental data and numerical results. The results of the simulation showed that computational fluid dynamics can predict the outlet fluid temperature with errors between 1 to 22%. In most cases, the predicted temperatures were higher than those of experimented data and higher errors were observed for higher flow rates.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Solar energy</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Flat plate solar collector</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Computational Fluid Dynamics</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Fluid temperature</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jser.ut.ac.ir/article_88970_f1f83c3475b4bf28a7f747efc955e689.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Solar Energy Research</JournalTitle>
				<Issn>2588-3097</Issn>
				<Volume>7</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>10</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Optimal Selection and Economical Ranking of Isolated Renewable-based CHP Microgrid in Cold Climate, a Case Study for a Rural Healthcare Center</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1143</FirstPage>
			<LastPage>1158</LastPage>
			<ELocationID EIdType="pii">89152</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jser.2022.328959.1214</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Daryosh</FirstName>
					<LastName>Mohamadi Janaki</LastName>
<Affiliation>Faculty of Engineering, Shahrekord University, Rahbar Boulevard, PO Box 115, Shahrekord, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>Iman</FirstName>
					<LastName>Pishkar</LastName>
<Affiliation>Department of Mechanics, Payame Noor University, PO BOX 19395-3697, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Mehdi</FirstName>
					<LastName>Mohamadi Janaki</LastName>
<Affiliation>Department of Industrial Engineering, Faculty of Engineering, Kharazmi University, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Reza</FirstName>
					<LastName>Alayi</LastName>
<Affiliation>Departement of mechanics, Germi branch, Islamic Azad university, Germi, Iran</Affiliation>
<Identifier Source="ORCID">0000-0003-2190-1185</Identifier>

</Author>
<Author>
					<FirstName>Mohammad Hossein</FirstName>
					<LastName>Sediqi Samani</LastName>
<Affiliation>Department of Biomedical Engineering, Shahrekord Branch, Islamic Azad University, Shahrekord, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Ahmad</FirstName>
					<LastName>Tahmasebi</LastName>
<Affiliation>Research and Development Department, Pars Regulator Company, Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>08</Month>
					<Day>16</Day>
				</PubDate>
			</History>
		    <Abstract>Rural Health Centers (RHCs) are nationally crucial points of interests, requiring electricity to continue storing drugs, offering health services, performing minor and outpatient surgeries, and other health services under any circumstances. With outbreaks such as COVID-19, constant power supply has become a challenging endeavor in Iran craving more attention. Accordingly, this research aimed at finding an optimum combined heat and power (CHP) system using renewable energies (wind, solar, and animal biomass) for the first time in a RHC in Iran. Different hybrid scenarios were evaluated and ranked in HOMER v2.81. The techno-economic-environment-energy performance of vortex turbines were assessed, for the first time, and were then added to the software database. The results showed that the top three scenarios are solar cell-battery (first scenario), solar cell-biomass-battery (second scenario), and solar cell-wind turbine-battery (third scenario) with levelized cost of energy (LCOE) of 0.393, 0.406, and 0.468 $/kWh, respectively. In the top economic scenario, 25% of the required energy was generated by solar cells and the rest by gas boiler that producing 7,050 kg of CO2 annually. In the third scenario, the most environmentally friendly one, CO2 was reduced by about 60 kg compared to the first scenario. Another important point is the important role of dump load in converting excess electricity into heat, contributing to 20% of the generated heat in the first scenario. Based on the results, the authors suggest focusing on solar energy in the studied region given its higher economic potential than wind and biomass energies.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Rural healthcare</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">CHP</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">HOMER software</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Vortex bladeless</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Excess electricity</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jser.ut.ac.ir/article_89152_e3651a24a59395f95f7e4d71c758a4c1.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Solar Energy Research</JournalTitle>
				<Issn>2588-3097</Issn>
				<Volume>7</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>10</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>An Economic Based Analysis of Fossil Fuel Powered Generator and Solar Photovoltaic System as Complementary Electricity Source for a University Student’s Room</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1159</FirstPage>
			<LastPage>1173</LastPage>
			<ELocationID EIdType="pii">89160</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jser.2021.332724.1225</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Victor Mmerichukwu</FirstName>
					<LastName>Mbachu</LastName>
<Affiliation>Department of  Industrial and Production Engineering,
Faculty of Engineering,
Nnamdi Azikiwe University, Awka, Nigeria</Affiliation>

</Author>
<Author>
					<FirstName>Abumchukwu Gerald</FirstName>
					<LastName>Muogbo</LastName>
<Affiliation>Department of Industrial and Production Engineering,
Faculty of Engineering,
Nnamdi Azikiwe University, Awka</Affiliation>

</Author>
<Author>
					<FirstName>Okechukwu Sylvester</FirstName>
					<LastName>Ezeanaka</LastName>
<Affiliation>Department of Industrial &amp;amp; Production Engineering,
Faculty of Engineering,
Nnamdi Azikiwe University, Awka.</Affiliation>

</Author>
<Author>
					<FirstName>Emmanuella Obiageli</FirstName>
					<LastName>Ejichukwu</LastName>
<Affiliation>Department of Industrial and Production Engineering,
Faculty of Engineering,
Nnamdi Azikiwe University, Awka, Nigeria</Affiliation>

</Author>
<Author>
					<FirstName>ThankGod Dozie</FirstName>
					<LastName>Ekwunife</LastName>
<Affiliation>Department of Electronics and Computer Engineering, 
Faculty of Engineering,
Nnamdi Azikiwe University, Awka, Nigeria</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>10</Month>
					<Day>22</Day>
				</PubDate>
			</History>
		    <Abstract>Notwithstanding the reported hazardous effect of combustion of fossil fuel on humans and the environment, and the established viability of renewable energy source (in this case solar) as alternative sources of electricity in Nigeria; there seems to be increasing subscription to fossil fuel powered generators amongst regular university students living off campus. Beyond functionality and safety, the economic implication of acquiring and running an energy generating source seems to contribute significantly in the decision to adopt same. Similarly, student’s propensity to choose an alternative electricity supply source is supposedly affected by this factor. There is therefore need for economic based analysis of the alternative sources. The results of an online based survey among the students and a mini experiment served as basis for and input data in the analysis. The cost implications as at the time of this research were obtained from local vendors, classified and used in the analysis. Net present worth, net annual worth, benefit-cost ratio and return on investment were measures employed in the analysis, and decision making was based on the set criteria. The result of the analysis shows that the challenger (solar photovoltaic system) could be more economical than the defender (fossil fuel powered generators) for the 5 years’ study period, if the current electricity load of the selected student’s room is optimized.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Solar energy</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">renewable energy</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Economic Analysis</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Fossil fuel</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jser.ut.ac.ir/article_89160_8fe55c83179e0cd00cf0c350f295e1e7.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Solar Energy Research</JournalTitle>
				<Issn>2588-3097</Issn>
				<Volume>7</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>10</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Numerical Simulation of Air Conditioning System Based on the Solar Chimney Concept</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1174</FirstPage>
			<LastPage>1187</LastPage>
			<ELocationID EIdType="pii">89252</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jser.2022.328010.1212</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Iman</FirstName>
					<LastName>Pishkar</LastName>
<Affiliation>Department of Mechanics, Payame Noor University, PO BOX 19395-3697, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0001-5110-2566</Identifier>

</Author>
<Author>
					<FirstName>Shokrallah</FirstName>
					<LastName>Mohammad Beigi</LastName>
<Affiliation>Mechanical Engineering Department, Engineering Faculty of Shahrekord University, Shahrekord, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Alireza</FirstName>
					<LastName>Shateri</LastName>
<Affiliation>Mechanical Engineering Department, Engineering Faculty of Shahrekord University, Shahrekord, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>07</Month>
					<Day>30</Day>
				</PubDate>
			</History>
		    <Abstract>Solar chimneys are classified as a passive way of using solar power to provide a comfortable atmosphere inside buildings without requiring any mechanical devices. In this study, the use of solar chimneys to generate a steady air flow inside the building in order to reduce the temperature and increase the air quality was investigated. To reduce the temperature, the evaporative cooling by spraying small droplets of water into the air is used. To achieve this aim, a three-dimensional geometry of the structure of a real building was simulated by numerical simulation fluid flow and energy equations were numerically simultaneously. The results obtained for the air by installation of a solar chimney with an average area of 12 in a 60 building with an average radiation of 600 , the air temperature can be reduced to 23 and its relative humidity can reach 50%. The results obtained are in good agreement with the reported results available in the literature.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Solar chimney</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Numerical solution</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Evaporative Cooling</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Water Spraying</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jser.ut.ac.ir/article_89252_e3f3374ff0b178337b7dde905fb87e17.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Solar Energy Research</JournalTitle>
				<Issn>2588-3097</Issn>
				<Volume>7</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>10</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Experimental Study of the Performance of a Three-Dimensional Pyramid-Shaped Solar Water Heater in Different Conditions</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1188</FirstPage>
			<LastPage>1197</LastPage>
			<ELocationID EIdType="pii">89362</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jser.2022.343918.1245</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Mojtaba</FirstName>
					<LastName>Moravej</LastName>
<Affiliation>Department of Mechanical Engineering, Payame Noor University, Iran.</Affiliation>
<Identifier Source="ORCID">0000-0001-6847-3099</Identifier>

</Author>
<Author>
					<FirstName>Farshad</FirstName>
					<LastName>Ebrahimpour</LastName>
<Affiliation>Department of Agriculture, Payame Noor University, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Aydin</FirstName>
					<LastName>Salimi Asl</LastName>
<Affiliation>Department of Mechanical Engineering, Payame Noor University, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2022</Year>
					<Month>06</Month>
					<Day>01</Day>
				</PubDate>
			</History>
		    <Abstract>One of the important and effective criteria in performance of solar collectors is the adsorption geometry. In this study, a three-dimensional and fixed solar collector with pyramid geometry and diagonal risers which is designed and built by the author, has been experimentally investigated in southern Iran. Studies included the effects of environmental factors such as changes in radiation, angles and temperatures over time. The thermal performance of the collector has been evaluated according to the ASHRAE standard. Experimental results showed that in addition to the proper stability of this geometry, the rate of return in the normal state and using water as the operating fluid is approximately 35.1% on average and the maximum return obtained was about 46.2%. In addition, in the experiment by using of CuO-Water nanofluid with a concentration of 0.1% in the collector, it was found that the collector efficiency increases about 6% compared to the use of ordinary water.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Solar pyramid collector</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">CuO-water nanofluid</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Experimental study</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Efficiency</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jser.ut.ac.ir/article_89362_b2d8691625fff803b6ddcdcfe38d9ac4.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran</PublisherName>
				<JournalTitle>Journal of Solar Energy Research</JournalTitle>
				<Issn>2588-3097</Issn>
				<Volume>7</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>10</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Thermodynamic Analysis of ORC-GT Hybrid Cycle and Thermal Recovery from Photovoltaic Panels</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1198</FirstPage>
			<LastPage>1210</LastPage>
			<ELocationID EIdType="pii">89631</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jser.2022.325213.1206</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Somayeh Davoodabadi</FirstName>
					<LastName>Farahani</LastName>
<Affiliation>School of Mechanical Engineering, Arak University of Technology, 38181-41167, Arak, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Mohammad</FirstName>
					<LastName>Borzabadi Farahani</LastName>
<Affiliation>School of Mechanical Engineering, Arak University of Technology, 38181-41167, Arak, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Ali</FirstName>
					<LastName>Sajedi</LastName>
<Affiliation>School of Mechanical Engineering, Arak University of Technology, 38181-41167, Arak, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>06</Month>
					<Day>07</Day>
				</PubDate>
			</History>
		    <Abstract>Biomass and solar energy are considered attractive renewable energy sources for power generation plants. In this research, the thermodynamic analysis of the organic Rankine cycle (ORC)-gas turbine-photovoltaic panel (PV) is investigated. Biogas is used as a heat source in the gas turbine cycle. Photovoltaic panel is also used for heating the combustion air. In a gas turbine cycle, the passing air passes through a photovoltaic system and heats up before entering the combustion chamber. Biogas, 60% methane and 40% carbon dioxide, is used as fuel in gas turbines. Sensitivity analysis was performed for cycle input variables. Results display that the output power of the modified cycle is increased by about 28% compared to the base cycle. The use of photovoltaic panel increases the power of the cycle by 23%-25%. The results of the analysis of the second law of thermodynamics show that the most exergy destruction belongs to the combustion chamber. The use of a photovoltaic panel reduces the amount of exergy destruction in the combustion chamber. Increasing condenser pressure and steam turbine pressure reduce power cycle energy efficiency. The lowest and highest exergy efficiencies are related to condenser and gas turbine, respectively. Findings display that the overall cost of the proposed cycles increases with the increase of the compressor pressure ratio and the temperature of the inlet fluid to the turbine.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Photovoltaic panel</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Biogas</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Gas Turbine</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">organic Rankine cycle</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Thermodynamic analysis</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jser.ut.ac.ir/article_89631_4d044b9de211f5db6b31938af4e5f46d.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
